Image
News

Exceptional work at Shell headquarters

Commissioned by Kuijpers Centrale Projecten, Vink Systemen is providing the complete air technology installation for Shell’s headquarters. This concerns the supply, assembly and delivery in working order of the air treatment installation for the renovation project of Shell’s monumental 1917 building at Carel van Bylandtlaan 30, also known as C30, in The Hague.

On this project, very exceptional work is being done by the executive team. Namely, ducts are being installed in a dormer, which is about 110 years old. Its age, as well as its monumental status, mean that the work must be carried out very carefully and in accordance with regulations. The air ducts are connected to 52 dormers and provide return and supply air to 13 air handling units located in the basement. Three air handling units are in the attic. The return and supply of air is guided through the building by means of 12 shafts. Finally, all these ducts are insulated with 13 or 25mm ArmaFlex. All in all, this is a gigantic impressive execution and assembly challenge, but of course we look forward to the final result with confidence.

Stay up to date!

Our recent news

Image
28 February 2023

Work Planner


Vink Systems is a project organization in air technology and part of The Vink Group. We design, supply, install and maintain air ducts and air
Read more
Image
7 February 2023

Metalworker


Job Description As a metalworker, you will be working with metal on a daily basis. You will weld, set, roll, cut or grind various types
Read more
Image
7 February 2023

Chief mechanic (assembly)


Together with your team you will work throughout the Netherlands and sometimes abroad on beautiful projects. You celebrate successes with colleagues and put a smile
Read more
Image
7 February 2023

Mechanic (assembly)


Independently or in a team you will work throughout the Netherlands and sometimes abroad on beautiful projects, celebrate successes with colleagues and put a smile
Read more
Image
7 February 2023

Prospective Mechanic (assembly)


Together with an experienced mechanic, you will work throughout the Netherlands and sometimes abroad on beautiful projects. You celebrate successes with colleagues and put a
Read more
Image
7 February 2023

Junior Work Planner


As a junior work planner, you will ensure that our projects are well prepared during the design phase, but also that projects run smoothly during
Read more
Image
27 June 2022

Nice stake in largest construction projects in the Netherlands


In 2021, Vink Systemen had a nice 10% share in the largest construction projects in the Netherlands. Cobouw50 Projects is a new initiative by Cobouw
Read more
Lasersnijmachine moderniseert ons snijproces
13 June 2022

Laser cutting machine modernizes our cutting process


The website www.metaalnieuws.nl and www.laserbendingmachines.com published a nice article regarding our machinery. The purchase of a laser cutting machine modernizes the cutting process and our
Read more
Image
24 May 2022

Successful (re)certification VCA 2017/6.0


Vink Systemen’ current VCA certificate expires in June. For this reason, recertification took place in the month of April. This recertification was conducted in accordance
Read more
Image
4 May 2022

Project in pictures: Shell C30


The extraordinary work at Shell’s headquarters in The Hague can be seen in this project video. In almost 2 minutes, our work is summarized in
Read more
Dakkap met geïntegreerde opties
6 April 2022

Roof top with integrated options as desired


Several roof covers were produced this week. In consultation with the customer, the conduit and roof curb were integrated into the roof hoods. The fully
Read more
Image
4 April 2022

Galapagos Leiden project in focus


The Galapagos Leiden project was completed in the first quarter of 2022. The new Dutch headquarters of Galapagos has been built at Leiden Bio Science
Read more
Image
21 March 2022

Efficient and safe unloading with lifting roll containers


It is extremely important to work both safely and efficiently. In cooperation with logistics service provider Transport Keijzer Warmond and Ancra Systems, a container was
Read more
Image
22 February 2022

A great first step on the safety ladder


Safety is a very important issue within our fine organization. Each year there are new developments internally to bring additional attention to safety in the
Read more
EDGE Amsterdam
4 February 2022

The Edge in Amsterdam pictured


Commissioned by Bosman Companies, Vink Systemen provided the complete air technology installation for the EDGE project in Amsterdam. EDGE Amsterdam West is a 48,000m² redevelopment
Read more
Uniek uitblaasrooster van aluminium
1 February 2022

Special aluminum coated discharge grille


On behalf of a Soprowa Elsaker, we produced a unique discharge grille made of aluminum. The supply grille is custom-made for a cove application. Because
Read more
Image
27 January 2022

Modeling air ducts in BIM


For modeling air ducts, Vink Systemen uses BIM. BIM generally refers to Building Information Modeling in which digital building models are created. For modeling air
Read more
Project Vink Systemen
14 December 2021

Vink Groep finds new partner for the future in FIELDS Group


The shareholders of Vink Groep of Katwijk, South Holland, have sold their shares to FIELDS Group, an entrepreneurial investor focused on further developing companies with
Read more
Image
3 December 2021

Repurposing through renovation to church in Lemmer


Commissioned by Ten Have Installatie B.V., Vink Systemen supplies and assembles the air technical installation for a unique project in Lemmer. Here, a Reformed church
Read more
Image
1 December 2021

Clean air with our COVID-19 ventilation solutions.


Proper ventilation is necessary for a healthy and pleasant indoor environment. It also helps reduce the transmission of respiratory infections, such as COVID-19. Ventilation is
Read more
Image
1 November 2021

Impressive roof channels on project the Blender


Last October, innocent smoothies’ project the Blender was delivered. A wonderful collaboration with Boulting Group, where a completely CO2 neutral electric plant in the Port
Read more
Image
1 November 2021

Factory the Blender from Innocent Smoothies runs


Healthy beverage maker innocent is opening its own plant, blender, for the first time since its inception in 1999. With this, innocent is also the
Read more
Image
11 October 2021

Successful anniversary day 50 years Vink Groep


This year, Vink Groep is celebrating its 50th anniversary. A great and historic milestone for our Katwijk organization. Once started by Ed Vink as a
Read more
Kwaliteit luchtkanalen
6 October 2021

Quality air ducts checked frequently


Every day many square meters of air ducts are produced at our factory in Katwijk. To ensure the quality of the air ducts, the quality
Read more
Grote batch dakkappen gereed
12 September 2021

Large batch of roof caps completed


A complete batch of roof hoods is ready at Vink Products’ factory. The roof caps were custom manufactured by our team in the construction department.
Read more
Image
19 August 2021

Your supplier for PIR/POL air ducts


In cooperation with Vink Products BV, in addition to air ducts made of galvanized steel, aluminum, stainless steel and plain steel, we also produce and
Read more
Image
11 August 2021

Progress project Galapagos Leiden


In March 2021, Vink Systemen began work on Galapagos’ new headquarters at Leiden Bio Science Park. By order of Schulte & Lestraden B.V., Vink Systemen
Read more
Image
15 June 2021

EDGE Amsterdam West


As of late 2018, Vink Systemen is involved in a truly wonderful project, namely EDGE Amsterdam West. Commissioned by Bosman Companies, Vink Systemen is providing
Read more
Image
4 June 2021

Ventilation Solutions


Proper ventilation is necessary for a healthy and pleasant indoor environment. It also helps reduce the transmission of respiratory infections, such as COVID-19. There are
Read more
Image
14 May 2021

Westfield Mall work in view


Last month, Westfield Mall of the Netherlands in Leidschendam officially opened. From March 2018 through March 2021, Vink Systemen supplied and assembled the complete air
Read more
Image
30 March 2021

Exceptional work at Shell headquarters


Commissioned by Kuijpers Centrale Projecten, Vink Systemen is providing the complete air technology installation for Shell’s headquarters. This concerns the supply, assembly and delivery in
Read more
Image
16 March 2021

Internal SCC audit passed favorably


Vink Systemen is already VCA certified, however an external organization was recently engaged to conduct an internal audit. During this audit, the company is tested
Read more
Image
22 January 2021

Video of Project Tacx in Oegstgeest is online


For Tacx’s new premises in Oegstgeest, we supplied and assembled the complete air technical installation, commissioned by A. de Jong Installatietechniek B.V. The Tacx family
Read more
Image
4 January 2021

Extensive ductwork gives Westfield Mall of the Netherlands air


On March 18, 2021, it will officially open: Westfield Mall of the Netherlands. However, the completely remodeled Leidsenhage is already unrecognizable. The largest shopping center
Read more
Image
14 December 2020

Vink Groep finds new partner for the future in FIELDS Group


The shareholders of Vink Groep of Katwijk, South Holland, have sold their shares to FIELDS Group, an entrepreneurial investor focused on further developing companies with
Read more
Image
22 October 2020

The art of roof channels


Installation and Construction magazine features an interesting and fun article on the installation of roof ducts by Vink Systemen. Read the full article below: Approximately
Read more
Image
22 October 2020

Work at COVID-19 laboratory in full swing


In early October, a project team from Vink Systemen began performing work on the construction of a laboratory in Leiden. After completion, this laboratory will
Read more
Image
16 July 2020

Renovation and expansion of ”The New Maaskant”


Vink Systemen mounts ductwork for the municipal monument ‘De Nieuwe Maaskant’ on the Schiehaven in Rotterdam. This building will be renovated and expanded beginning in
Read more
Rotterdam Ahoy Convention Centre (RACC)
14 July 2020

Rotterdam Ahoy Convention Centre in Installation and construction


The Installatie en Bouw magazine features a nice article about Vink Systemen’ work on the Rotterdam Ahoy Convention Centre (RACC) project. Read the full article
Read more
Image
17 June 2020

Tick Systems in the LUKA channel journal


In the channel journal of Luka Dutch Association of Air Duct Manufacturers of there is a nice article about Vink Systemen. This article concerns the
Read more
Mall of the Netherlands
8 June 2020

Mall of the Netherlands


Vink Systemen has been performing work for the construction of the new shopping center ‘Westfield Mall of theNetherlands’ for some time. Vink Systemen began work
Read more
Image
25 October 2017

Installation of air handling units Tabor College


Vink Systemen delivered and installed new air handling units on the Tabor College project. The air handling units are connected with PIR/POL ductwork fabricated by
Read more
Image
21 July 2017

Employee Danny van der Hoek passed Luka diploma!


How proud we are of Danny! With a convincing grade, he passed his Luka diploma Chief Mechanic Class C! E-learning Luka Chief Mechanic courses. An
Read more
Image
24 April 2017

PIR / POL roof channels project Maasvlakte Plaza


On the Maasvlakte Plaza project, Vink Systemen delivered 30 mm PIR/POL roof channels. As is standard on this project, the couplings are completely finished with
Read more
Image
31 March 2017

Vink Systemen – New role for manufacturer


Vink Systemen of Katwijk ZH is one of the forerunners in the air duct industry when it comes to applying BIM. Itannex spoke with Rob
Read more
Image
24 January 2017

LUKA certificate 2017


As a LUKA member, Vink Systemen is inspected annually by TÜV Rheinland®on the production, assembly and airtightness of rectangular and round air ducts. During the
Read more

ARE YOU RUNNING INTO SOMETHING?

We like to think with you!

Get in touch